Don’t Buy The 7 Best Ultrasonic Cleaners Until You Read This
Ultrasonic Cleaners for Miniatures and Airbrushes
Are you trying to speed up the painting and modeling process for miniatures and looking for an ultrasonic cleaner?
For cleaning airbrushes and removing paint off models, ultrasonic cleaners work wonders.
Scale modelers and miniature painters are likely familiar with how difficult airbrush cleanup can be.
Maintenance on airbrushes, cleaning 3D-printed miniatures, and paint removal all take a lot of time and effort.
Can an ultrasonic cleaning make things go more quickly?
I go through the essential information concerning ultrasonic cleaners for airbrushes and miniatures in this article.
I also examine the top 7 ultrasonic cleaners for cleaning models and airbrushes.
Which ultrasonic cleaner works best for cleaning miniatures and airbrushes?
Saving time is crucial for me as a miniature painter on commission because it enhances the final quality of my work. I spend more time painting than cleaning.
The top 7 ultrasonic cleaners for airbrushes and hobbyists are listed below:
An ultrasonic cleaner is what?
To create tiny cavitation bubbles in a liquid bath, an ultrasonic cleaner uses sound waves. An object is “scrubbed” by the production and explosion of these many bubbles.
In order to agitate a liquid, ultrasonic cleaning creates cavitation bubbles using high frequency pressure (sound) waves (source).
Bubbles cover everything, protecting delicate components from potential harm.
When used on complex equipment like an airbrush, an ultrasonic cleaner’s washing strength may get into even the smallest gaps.
Best 7 Recommendations for Ultrasonic Cleaners for Airbrushes and Models:
1. IniviClean Professional Ultrasonic Cleaner Machine
This is the setup I’m using right now. Dual transducers are used in the InvisiClean Pro ultrasonic cleaner (or two sound sources).
Its tiny footprint, which measures 8.7 x 5.4 x 5.6 inches, is ideal for a small desk area.
The tank has a maximum water capacity of 800 ml, which is more than enough to thoroughly clean an airbrush.
You can set the machine’s timer to run for anywhere between 90 and 600 seconds.
This is fantastic since you can leave the cleaner running for up to 10 minutes at a time while you are away.
Even though it is a low-cost ultrasonic cleaner, this device is not a dud. With the help of this ultrasonic cleaner, I’ve cleaned a ton of miniatures.
Pewter, plastic, or resin didn’t matter; they all emerged from the water bath prepared for painting. I do not advise utilizing the basket (included).
The basket decreases the bath’s ability to be cleaned by sound waves. See if this inexpensive cleaner would be a good fit for you by taking a closer look!
2. Nexttechnology Ultrasonic Cleaner
This Nexttechnology ultrasonic cleaner is straightforward. Simple and convenient. Instead of two transducers, this cleaner just has one.
However, you have some control over the sound waves‘ output frequency. This enables you to set the desired “abrasive” cleaning level.
It should be noted that some of the best jewelry cleaning devices offer this function, which is useful for cleaning more delicate model parts.
Additionally, this cleaner offers a transducer that is more potent and can operate much longer (up to 30 minutes) than the InvisiClean system.
Additionally, it costs a little less than InvisiCleaner. I can’t decide between the two systems.
3. CO-C 3L Professional Ultrasonic Cleaner with Digital Timer & Heater
There are a few features that the CO-Z 3L Professional Ultrasonic Cleaner possesses that the other models on this list do not.
The larger bath is the feature that stands out the most. It has a 3 liter (or 3000 ml) maximum fluid capacity.
You could clean a lot more items around your home thanks to this, including your airbrush.
If I had the additional funds, I might have purchased this. I could have cleaned numerous smaller models at once or bigger models like 40K Imperial Knights.
Two robust 60 Watt transducers are present in this ultrasonic cleaner.
This is amazing! Some TV speaker systems for home entertainment, including those made by Bose, don’t have as much power.
To push sound through 3L of water, I imagine, it would take this power.
This ultrasonic cleaner also allows you to change the frequency.
The practical footprint size of this cleaner is another amazing feature. It occupies almost the same amount of desk or floor space as its smaller relatives.
It is simply taller. A timer (continuous operation for up to 30 minutes) and a heater are two additional features that I find appealing.
4. iSonic Digital Ultrasonic Cleaner
One of the more compact ultrasonic cleaners is the iSonic Digital Ultrasonic Cleaner.
The Badger Patriot 105, which is my largest airbrush, barely fits in its 600ml bath. It is one of the more affordable ultrasonic cleaners on this list.
The cleaner is also compact enough to easily put on a desk. For sensitive parts with small cracks, its single frequency (42 kHz) operation is ideal.
The timer will run a single sound transducer for up to 10 minutes before automatically turning off the system. iSonic also has a small parts storage plastic basket.
5. Magnasonic Professional Ultrasonic Jewelry Cleaner with Digital Timer
The Magnasonic Professional Ultrasonic Cleaner is essentially identical to #4 except that it has much more Amazon reviews.
The InvisiClean system (in #4) uses a transducer frequency of 42 kHz and a power output of the same magnitude.
There’s a good reason why cleaning jewelry and other delicate things with this ultrasonic cleaner is its optimum use.
It comes with a plastic basket to hold small items and has a footprint that is reasonably movable.
This ultrasonic cleaner can be placed practically anywhere close to your desk.
This cleaner is the one to buy if all you need is a basic ultrasonic cleaner with a timer and you want to know that many other people use it.
6. Digital Ultrasonic Gun Cleaner Heated
I realized that people who own guns would probably be very knowledgeable about ultrasonic cleaners when I was doing my study on them.
After all, weapons have several tiny components that need to be thoroughly cleaned. Compared to those designed for cleaning jewelry.
The Digital Ultrasonic Gun Cleaner is a more forceful ultrasonic cleaner.
One feature of the Digital Ultrasonic Gun Cleaner is an integrated bath heater.
You can heat to about 80 °C! (Note: 60 degrees Celsius is the ideal cavitation temperature for optimum bubble-scrubbing action.)
Heat and two sound transducers work together to create a very potent cleaning capability.
You can scrub with large or small cavitation bubbles thanks to the ability to vary sound frequency (28kHz and 40kHz).
Small bubbles may fit into tiny spaces, whereas large bubbles are more “abrasive.”
A 2 liter bath capacity is also included with this ultrasonic cleaner. Because of this, washing even the largest miniatures before construction would be simple.
Why should I purchase this ultrasonic cleaner? Simple. Cleaning resin miniatures requires the ability to heat the bath.
The cast/mold-released process frequently leaves a petroleum/oil-based residue on resin parts.
Additionally, I would have bought this ultrasonic cleaner if I airbrushed with oil-based paints in addition to acrylics.
7. DK SONIC Ultrasonic Cleaner with Digital Timer
You could possibly discover the DK SONIC Ultrasonic Cleaner in a jewelry or eyeglass store. It is a compact cleaner made of stainless steel.
In comparison to other ultrasonic cleaners, the bath has a medium size capacity of 0.7 liters.
Cool features of this ultrasonic cleaner include its eighteen timer settings, which range from one second to thirty minutes
And its automatic shut-off feature when there is no water in the tank. Energy is conserved, and any fragile components left in the tank without water are protected from damage.
The energy passed via the fluid during a prolonged cleaning session in an ultrasonic cleaner has the unintended side effect of automatically heating the bath.
No heating is required!
The 42 KHz frequency of the ultrasonic cleaner makes it perfect for cleaning small airbrush parts, plastic or resin model kits, and other equipment you could use for your hobby, such as forceps, tweezers, and sculpting tools.
Just be careful not to clean anything with an ultrasonic cleaner that you want to keep sharp, like blades or needles.
The delicate edges and tops of these things frequently become blunted and harmed by ultrasonic cleaners.
Last Word
Efficiency is crucial to me as a miniature painter and fine-scale modeler, and I’m constantly looking for ways to make my job go faster.
One of the worst offenders is the airbrush because it requires a lot of time to clean. A multipurpose tool, an ultrasonic cleaner can expedite normal cleaning tasks.
An ultrasonic cleaner is a fantastic tool for any enthusiast, whether you’re cleaning a dismantled airbrush or preparing a model for paint.
Read More Here about Top 4 Most Effective Display Cases For Painted Miniatures
Read More About Painting Miniatures HERE
