Which Is Better: Citadel Painting Handle Vs. Hobby Holder?

Citadel Painting Handle vs. Hobby Holder

Updating the handles! What kind of magic is this? As the name suggests, all it is is something to place your miniature on while you paint it.

In this manner, you avoid touching them with your dirty paws.

Smudges, oils, and fingerprints are not good. But there’s more to it than that; one of my top three requirements for painting is stability.

A painting handle that you can use to support your wrists, hands, or fingers is quite useful.

Possessing a tool you can comfortably handle and manipulate can greatly improve your capacity to produce quality results overall.

So, this isn’t one of those things you buy and then just sit on. In fact, I use them so frequently that I purchased two Citadel handles and an extra-large handle.

Since the 1990s, the regulations for miniature painting have altered.

Back then, handling the miniatures while applying paint directly from the pot with a brush was acceptable. It’s inhumane. Gross.

Modern plastic technology allows us to hold our minis. Man, change with the times!

Let’s discuss two of the most well-liked miniature painting holders on the market right now, along with some do-it-yourself ideas, shall we?

The Citadel Painting Handle

Warhammer miniatures may be held as you apply paint to them with the Citadel Painting Handle, a plastic knob-like holder.

Of course, different miniatures work with this as well. Ideally, minis that are the same size. The holder also comes in an XL size.

So what exactly does it do? That makes it possible to paint without having to worry about the model moving around too much.

Also, it prevents you from mistakenly touching painted areas repeatedly, which could remove the paint and detract from the aesthetics.

This is a photo of me. Once more, I use them whenever I paint and occasionally even for priming.

Why Should You Purchase It?

One of the better options available is the Citadel Painting Handle. It secures the base of the miniature by clamping it using a spring mechanism.

Imagine painting a small figure while holding it only by its base; you’ll probably find the task to be quite difficult.

It’s possible that your index finger will reach out and touch a portion of the miniature top, which is usually a weapon or the model’s head.

The problem is that if you touch any painted portion of your model with your fingers because they may be covered in oil or grease, the paint will fall off.

This is going to be a problem unless you want to paint over it several times or just stick to the base area.

You might not have to be concerned about the paint rubbing off if you know how to prime your models properly or if you exclusively paint plastic miniatures.

That’s because the paint will probably adhere to the new plastic surface rather effectively.

On the other hand, you can experience paint chipping if you’re painting an old model or one made of resin.

In addition, some people begin to get muscle cramps when they hold the miniatures by the base for an extended period of time.

An ergonomic solution like a painting holder can make the job simpler and lessen muscle strain.

How It Is Made And How It Operates

The handle is located at the bottom, while the small mount is located at the top. The handle was created with the user’s comfort and convenience in mind.

Nevertheless it can be a little tiny for those with large hands.

All you have to do is slowly draw the springs back in after removing the mounts on either side. Any of your miniature figures can then be placed there.

They will remain steady because of the springs’ pressure on the base’s side.

This Building

The Citadel Painting Handle’s plastic structure is robust enough to take a beating.

Due to the weight of the mount, the handle’s balancing point is elevated.

This means that it might not be the best choice for clumsy persons because it frequently topples over.

That could have worked better for everyone if there had been a little more weight at the bottom.

Miniatures are mounted and removed from the holder.

Little bases are typically very simple to insert and remove when installing and dismounting miniatures on the painting handle.

But, working with miniatures that have a larger base may be a little difficult for you.

The clamping technique does have the advantage of making the miniatures stick in place.

Even with figurines from heavy metal, it still functions remarkably well.

While mounting and demounting large models, you’ll probably need to use both of your hands.

And there’s a chance you’ll think that having an extra helping hand will make the job go more quickly and easily.

In general, the easier the task will be for you, the better your hand-eye synchronization.

The Optimal Tiny Size

What size miniatures can a Citadel Painting Handle hold that are ideal?

It can fit a variety of small sizes because of the way its handle is made.

Generally, the following bases benefit from its use:

• Approximately 25 mm circular bases for small infantry
• Approximately 32 mm circular bases for medium infantry
• Oval bases, 60 x 35 mm, for standard cavalry.
• Monster infantry with bases of about 40 mm.

The crucial point to make in this case is that 50 mm round bases cannot be used with this painting handle.

The following models can be used with square-base miniatures in the Citadel Painting Handling.

• 25 mm square base,
• Square base 20 mm
• Base for old cavalry, measuring 25 x 50 mm.

Likewise, bases that are larger than 40 or 50 mm square may not fit in well. Choose the XL version in that situation.

Pros:

• Doesn’t need any extra preparation on the painting holder or the miniature
• The miniature cannot be removed or moved independently once it has been installed.
• The handle is really reasonably priced.
• The handle provides a comfortable grasp, at least significantly better than holding the miniature by its base.
• keeps hands from cramping up while painting miniatures
• It’s the ideal product to determine whether you enjoy using various painting handles.
• The handle’s screw is nearly the same size as the majority of camera mounting accessories.

Cons:

• The Citadel holder is too small to provide support for your painting hand, unlike most miniature painting stands that let you rest it on the holder itself.
• With time, the spring can become less powerful.
• only accepts a few base types; unusual miniatures definitely won’t fit completely.
• If you’ve already painted one or two parts of the model, you might find yourself fumbling around trying to install it on the handle and possibly damaging its appearance.
• The mounting procedure prevents it from being the ideal option for batch painting.
• While mounting your miniatures, you must take care and follow the proper procedures. If not, the spring’s pressure will cause them to soar through the air.
• Due to the holder’s propensity to tip, your miniatures could be damaged.
• The handle could apply more pressure on the base rims than is necessary, thus damaging the painted components.
• There is no method to modify the handle if your grip is uncomfortable.

The Hobby Holder

With its clever and practical design, the Hobby Holder completely dominated the market.

Your miniaturized painting sessions will be more convenient, fun, and comfortable with the help of this adaptable and flexible device.

The truth is that this one is a matter of taste. You can kind of twist your tiny around, which is one significant aspect I appreciate about it. That’s really neat.

Furthermore, it has a lot more versatility than the Citadel version. You can use the small arm that appears to do the “pinch” grip.

There are many possible applications for it, which I’ll outline below with some images.

What It Does

Hobby Holder connects the miniature and its base using a bottle cap, which is rather fascinating.

Isn’t that incredible?

All you have to do is click on the handle after screwing a conventional bottle cap onto the base of your miniature figure. I’m done now!

Nobody will feel terrible, in my opinion, if a hole is drilled through a bottle cap to allow for the models to be pinned or even if more tacks are required to attach the base to the cap.

Read More Here about Don’t Buy The 7 Best Ultrasonic Cleaners Until You Read This

Read More About Painting Miniatures HERE